SR20/KA24 High Performance Engine fan - 60% more air flow Weld In Plates Saves over 1kg each side

Saves over 1kg each side compared to the HFM 1 piece rotors

When installing an aftermarket coolant temp gauge or setting up a header/bleeder tank you'll need to tap into the return on your radiator hose

For more information: Check out this blog post on mastering bump steer

The FMVSS106 testing procedure that the lines have been tested against includes the following tests:

or if you need we do have them on the shelf

SR20/KA24 High Performance Engine fan - 60% more air flow Weld In Plates Saves over 1kg each sideOver 10,000 sold! This is probably the single best cooling mod you can do to your car! The GKTECH high performance engine fan has been designed and engineered in Australia by our in house team with the intention of pulling more air than the factory item. When tested on a dyno the GKTECH high performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).