100HN: Nylon Coated Cross Bolt Hanger Clamp (Indoor Dirty Dry) Crane Control The 1000KN comes with an

The 1000KN comes with an insulator spool

Thisself-supporting sleeveprovides 1/2" (13mm) over-surface gap electrically

Isolation points are used to insulate the adjacent conductor sections from each other for separate control circuits or repair= bays

This particular model is classified under 'high heat'

(But it must be field adjusted in order to achieve the correct sliding tension required unless it is being used as anchor

100HN: Nylon Coated Cross Bolt Hanger Clamp (Indoor Dirty Dry) Crane Control The 1000KN comes with an100HN: Nylon Coated Cross Bolt Hanger Clamp (Indoor, Dirty, Dry) This plastic coated steel single hanger cross bolt can be used in dirty, dry, and indoor environments. The 100HN hanger clamp is designed to effectively snap in place, but must be field adjusted in order to achieve the correct sliding tension (unless it is being used as anchor). Hanger Instruction Anchor Hangers: Tighten cross bolts to 6ft lb. Sliding Hangers: For conductor expansion.