Roughing Down Cut Spiral 1/2" Shank Straight Bits Single Flute their cut is not as

their cut is not as prominent than the Half Rounds

leaving just the traditional roundover edge on your workpiece for a clean

JOINTS/SPLINES: Perfect for making biscuit joints

TOOL SPECS: Carbide-tipped cove & bead bit with 5/32" radius

Flush trim bits cut the wood on your project so that it is flush with the template edge

Roughing Down Cut Spiral 1/2" Shank Straight Bits Single Flute their cut is not asMaterials: Natural woods, composites Recommended RPM: 16,000 18,000 (max 24,000) Just as their name implies, these bits are designed for increasing cutting feed rates and decreasing project cut out time in plywood, melamine, mdf, and most engineered products. The down cut spiral design ejects chips away from the router when routing through material. This design also decreases the tendency to lift thin small work pieces during CNC routing. TOOL SPECS: