LINK ECU - CANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN) (101-0211) c7 Characteristics:

Characteristics:

As soon as the car starts to understeer you need to wind off the steering lock to reduce the work effort applied to the tyres to allow them to regain traction

You can also butt the filler neck up to the water neck and use a short piece of hose to connect the two

Precision machine welded STKM13C Steel Lower Mounts or 6061-T6 milled Aluminum Lower Mounts where applicable

The Power FC MAP sensor splitter harness is used on D-Jetro applications where a twin MAP sensor setup is required

LINK ECU - CANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN) (101-0211) c7 Characteristics:Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU. Compatible ECU's: G4X G4+ Xtreme (CAN1) G4X G4+ Fury (CAN1) G4+ Force (CAN1) G4+ Thunder (CAN1) Specs DTM4 Male to LTW 6 pin. 12V & GND Flying Leads. CAN Loom Length 300mm (Flying lead length 500mm) DTM4 Pin Out Pin 4: CAN H Pin 3: CAN L Pin 2: Ground Pin 1: 12V