Cake Stand Mold Style:Option A - 1/2" Faceted Top For wiring your lamp hardware

For wiring your lamp hardware

This will ensure the bottle stand does not become warped under the weight of the wine

• Requires approximately 7100ml/240 fl oz of resin--------------------------------------------------------------• All surfaces inside the mold are smooth and shiny - no more sanding/polishing your finished piece

You will need approximately 150ml/5 fl oz of resin for this mold

• Requires approximately 325ml/11 fl oz of resin

Cake Stand Mold Style:Option A - 1/2" Faceted Top For wiring your lamp hardwareHandmade with Love This mold makes a beautiful cake stand. There are two separate parts to the mold the top and the base. To assemble once the two parts are completed and unmolded, add a small amount of resin to the indent in the top of the cake stand and insert the small end of the base. Allow to cure before using. For best results, use a hard curing resin for the top of the cake stand (such as iCoat Medium Viscosity resin). There are three options